Vypínač pojistky SAAB (pro chybu steering lock malf.)
Vypínač pojistky SAAB (pro chybu steering lock malf.)
Vypínač pojistky SAAB (pro chybu steering lock malf.)
Vypínač pojistky SAAB (pro chybu steering lock malf.)
Vypínač pojistky SAAB (pro chybu steering lock malf.)
Vypínač pojistky SAAB (pro chybu steering lock malf.)
Vypínač pojistky SAAB (pro chybu steering lock malf.)
Vypínač pojistky SAAB (pro chybu steering lock malf.)
Vypínač pojistky SAAB (pro chybu steering lock malf.)
Vypínač pojistky SAAB (pro chybu steering lock malf.)
Vypínač pojistky SAAB (pro chybu steering lock malf.)
Vypínač pojistky SAAB (pro chybu steering lock malf.)

Vypínač pojistky SAAB (pro chybu steering lock malf.)

Běžná cena
€27,00
Prodejní cena
€27,00
Běžná cena
Vyprodáno
Jednotková cena
za 

Car fuse switch available for SAAB 9-3 models manufactured from 2003 to 2011, which commonly experience an issue with the steering wheel lock, preventing the key from turning in the ignition. When this occurs, the message "STEERING LOCK MALFUNCTION" appears on the screen, and the car cannot be started.

To resolve this problem, you can replace fuse number 2 (5A) in the cabin fuse box with a bypass. The bypass includes a cable that can be wired through the dashboard, with a button placed above the pedals. The button can either be leaned on the bottom part of the dashboard or installed by drilling a small 2 cm hole under the steering wheel. When the steering lock malfunction occurs, you can restart the ignition circuit by switching the button off and on again.


Before ordering the bypass, make sure that reinserting fuse number 2 alone does solve the problem. If the fuse replacement does not resolve the issue, the bypass will not be effective.

Specifications of the bypass are as follows:
- voltage: 12 V
- fuse current: 5A
- cable lenght: 30 cm
- mini car fuse
- crimped contacts
- well isolated 
- black switch (button)


 IMPORTANT NOTES!

  • Please be aware that this is not an original part for your car.
  • Never exceed the recommended current limit to prevent the risk of fire.
  • After installation and powering on, carefully touch the component to check for any signs of overheating. If detected, disconnect the component immediately.
  • The seller holds no responsibility for any damages caused by the misuse of the product.

SHIPPING:
Usually within ONE WEEK from Czech republic.

cs